Showing posts with label guidelines. Show all posts
Showing posts with label guidelines. Show all posts

Thursday, 10 February 2011

Info about Jawahar Knowledge Centers (JKC)

Info about Jawahar Knowledge Centers (JKC)

To
The Principals of all affiliated colleges under JNTU, Kakinada

Sub: Jawahar Knowledge Centers (JKC) - Reg.

***
I am by the direction of the Hon’ble Vice-Chancellor wish to inform to you that Government of Andhra Pradesh is very keen in increasing the rate of employment and skill development initiatives for students while they are on the campus. In view of this government promoted Jawahar Knowledge Center Initiative through Institute for Electronic Governance and the results so far are encouraging. The objective of bridging the gap between the industry and academia is successfully attempted and the JKC initiative has been expanding over the last few years. Especially for the engineering and MCA colleges in the tier II and III towns, JKC is extending number of Industry initiatives. Some of the initiatives that are on cards for students in the forthcoming year are listed below.

1) Oracle came forward to give free software to all JKC registered colleges and train faculty on Oracle 10g software. IEG has signed MoU with Oracle Academy to this extent.

2) Microsoft has given free access to software for all JKC students and is organizing faculty development continuously on new technologies.

3) Infosys Campus Connect is delivered to various colleges through JKC. JKC is regularly monitoring the rollout of these modules and assessing the delivery mechanism.

4) IBM has signed MoU with IEG – JKC to train students on IBM technologies and give access to students on their software.

5) To deliver these technologies to students, IEG has trained and ear marked about 50 IT Associates for each industry initiative. Industry has come up with special certification price for JKC students. The trainings are given free of cost for JKC students which otherwise would cost money (Rs.10k – 20K minimum) and time.

6) Similar initiatives with CISCO, HCL, Autodesk, LabView, Adobe, etc are being worked out to enhance the technical skills of the students while they are on the campus.

7) IEG is also working with Government of India to have all JKC students certified (free of cost) on Modular Employable Skills.

8 ) IEG is allocating IT Associate to supplement JKC training to students where the student registrations are considerable in number. These IT associates will deliver one theory subject and a lab course for the college as a good will gesture.

9) IEG has signed MoU with IUCEE (Indo US Council for Engineering Education) to network its activities in the state of AP.

10) IEG has been helping out JKC students on LIVE Projects in the final year wherever there is good number of requests.

11) All JKC students are continuously assessed (planned once in a year) on various skills so that student can concentrate on skills in which he is week. The test results are hosted on the web site.

12) JKC is networking several student competitions, industry academia interactions, student and faculty workshop, etc to improve the competencies of students.

For more information you may check the website www.ieg.gov.in or call Smt K. Prathyusha, Program Manager, IEG, JNTU Campus, Masab Tank, Hyderabad (ph 9908131998)

In view of the above the Principals of the colleges are requested to address the students and faculty to make them aware of the program and its benefits. This would improve the employment potential in students which in the long run improves the society at large.

JNTU Paper Evaluation & Electronic Distribution of Question Papers

JNTU Paper Evaluation & Electronic Distribution of Question Papers

Electronic Distribution of Examination Question papers :

The University examinations in all the affiliated colleges will be conducted by the University through its Nodal centres. In this procedure the question papers are randomly generated by the computers and they are stored in the electronic form duly encrypted. These encrypted soft copies are sent to the examination centres. These question papers can be decrypted by entering three levels of passwords. The final password will be issued by the university 30 minutes before the commencement of examination which will help the colleges to decrypt the question paper and print them at their centers. This gives full fool proof system and confidentiality.


Double Valuation System :

In order to make evaluation system perfect and to do justice to all the students, “Double valuation” system is introduced with effect from November, 2005 for all affiliated engineering colleges. According to this procedure each answer book will be evaluated independently by two examiners. These examiners will award the marks on different award lists without marking on the answer books. These two award lists will be compared by the Chief Examiner of the subject. If the difference between these two valuations is within the prescribed limits, the higher marks will be awarded to the student. If the differences are more than the prescribed limit the Chief Examiner will finalize the marks in consultation with the two examiners. The above examination procedure, make the foolproof examination and justified evaluation.

How to choose an Right Engineering College & Right Engineering Branch

How to choose an Right Engineering College & Right Engineering Branch

How to choose an Right Engineering College ?
Code:

http://forum.jntuworld.com/showthrea...eering-College

How to choose an Right Engineering Branch ?
Code:

http://forum.jntuworld.com/showthrea...neering-Branch

Got a Ranking in Engineering Entrance Exams - What's Next ?
Code:

http://forum.jntuworld.com/showthrea...ms-What-s-Next

Got a wrong branch - What to do ?
Code:

http://forum.jntuworld.com/showthrea...nch-What-to-do

How To Plan This Semester - Tips To ace This Semester (Follow Atleast Few)

How To Plan This Semester - Tips To ace This Semester (Follow Atleast Few)

SQ3R
This approach helps you get the most out of your reading. It will help you create notes from your reading from which to study.

1. Survey: Carefully pre-read the chapter. Look at the title, subtitles, boldface and italics, graphs and diagrams, summary and/or conclusion, and questions at the end of the chapter.

2. Question: Reading is a thinking process; inquiry makes you an active reader. Formulate questions before you read. Convert titles, subtitles, etc. into questions. WRITE THESE DOWN!

3. Read: Thoroughly read the chapter and fill in the answers to your questions as you go along.
Important: Read for meaning, not only the answers! Write down any information you sense is important.

4. Recite: Talk to yourself. Read your questions, answers and notes out loud. Translate key ideas and new terms into your own words. Research any answers or information that don't seem clear enough.

5. Review: Reread your notes as often as possible. Frequent review enables you to better retain the material.
BE FLEXIBLE! At first go through SQ3R step-by-step, and later alter it to suit your own purposes and style.


Note Taking Skills and Strategies
Tips on taking notes, techniques and strategies that will help you become a good note taker. Whether taking college lecture notes or class notes these tips will be of great help.

* If the instructor writes something on the chalkboard/overhead or repeats an idea then it is usually a key point and you should write it down.
* Try to sit towards the front and center of the class where you'll be less distracted and can hear the professor the best and have a good angle on any visual aids that may be shown.
* Don't rely on someone Else's notes, you may not understand everything that they write down and you'll learn the best by taking your own notes.
* If your instructor talks fast, it may help to bring an audio recorder and record the lecture while taking notes.
* After the lecture is over you can replay the lecture and fill in any parts that you missed in your notes.
* Do reading assignments or homework questions before class, it is easier to take notes when you know what the instructor is talking about.
* Date your notes; add titles and subtitles when you move onto a new topic for easy referencing.
* Write down any terminology along with the definition that the instructor may present.
* Make sure that you write legibly, if you can't read them later, they'll be useless.
* If you have sloppy handwriting it may be wise to type your notes so that they are easier to read.
* If you missed what the instructor said ask them to repeat it or go to the instructor after class and ask for clarification.
* If you are in a rush, ask the instructor at the beginning of the next class or try to find the answer from a friend or the text.
* Compare notes with a classmate to make sure you didn't miss any important points.

Study Skills Help & Study Tips

* Everyone is different, different methods work for different people the following are only suggestions on improving upon your current studying techniques.
* It is best to review the material right after class when it's still fresh in your memory.
* Don't try to do all your studying the night before the test, instead space out your studying, review class materials at least several times a week, focusing on one topic at a time.
* Have all of your study material in front of you: lecture notes, course textbooks, study guides and any other relevant material.Find a comfortable and quiet place to study with good lighting and little distractions (try avoiding your own bed; it is very tempting to just lie down and take a nap).
* Start out by studying the most important information. Learn the general concepts first; don't worry about learning the details until you have learned the main ideas.
* Take notes and write down a summary of the important ideas as you read through your study material.
* Take short breaks frequently, you memory retains the information that you study at the beginning and the end better than what you study in the middle.
* Space out your studying, you'll learn more by studying a little every day instead of waiting to cram at the last minute.
* By studying everyday, the material will stay in your long-term memory but if you try to study at the last moment, the material will only reside in your short-term memory that you'll easily forget.
* Make sure that you understand the material well, don't just read through the material and try to memorize everything.
* If you choose to study in a group, only study with others who are serious about the test.
* Test yourself or have someone test you on the material to find out what your weak and strong areas are.
* You can use the review questions at the end of each chapter or practice tests the teacher may give out as well as other materials.
* Listening to relaxing music such as classical or jazz on a low volume can relieve some of the boredom of studying. Don't study later than the time you usually go to sleep, you may fall asleep or be tempted to go to sleep, instead try studying in the afternoon or early evening.
* If you are a morning person try studying in the morning.


Creating Good Homework/Study Habits
Good study habits start with a clean and quiet environment. So whenever you start to study or do homework be sure to turn off the television, radio, and i‐pod. If you absolutely have to have background noise try playing soft classical music. Avoiding music with words and recognizable melodies helps limit distractions.

There are many different kinds of routines that can help you succeed in completing your homework. Below is an example of such a routine. I encourage you to try it faithfully for at least a week before switching routines. The more you do something the easier it will become.

1. When you come home get a quick snack and some water (not soda). Also, change yours clothes; it will give you a fresh start. (10‐15min.)

2. Sit down at a clean table with your planner, binder(s) and all your books.

3. Set a timer for 30 min., almost all microwaves or ovens have a kitchen timer setting.

4. Open your planner and get started on the first item listed. Work on that item until it is completed, then put it back your notebook so you will be sure to have it ready to turn in.

5. Once you finish the first item highlight it or put a check next to it in your planner. Then begin the next item.

6. When the timer goes off set it for 5 min. and use that time to take a quick break to use the restroom, get another drink of water or walk around.

7. Once your break time is over set the timer for 30 min. again. Continue working on your list, remembering to check off the assignments once they are completed.

8. Continue this pattern of 30 min. on and 5 min. off until all your work is completed.

9. Once you have done everything you are supposed to do, put all your schoolwork and supplies (books) in your backpack. Then put your backpack by the front door, so you are ready to go in the morning.

10. Now you are done and can enjoy the rest of your evening. Way to go!

-----------------------------------------------------------------------------------------------------------------------

Do you find it difficult to revise for exams when you have so many subjects and things to remember? If the answer is yes, then you're not alone! These tips should help.

* Find out the exact dates of your exams. You will know how much time you have left before each exam. It might help to draw up a table which includes all your subjects and all the weeks you have until the last exam, and then fill in the exam dates.
* Prioritize your subjects. If you think you have most to do in computer graphics or that is your weakest subject then this will be top priority. Put all your subjects in an order from most to least important.
* Decide on a revision plan which will work for you. How many hours do you need to do of a night? Do you have other commitments you can't get out of? Leave some time for breaks, meals and free time but ensure you have a good time slot each night for revision.
* Fill in your revision timetable in with your subjects, and use your priority list to give the most important ones more revision time.
* Stick to this timetable! Speaking from experience, if you decide to focus solely on one or two subjects because you think you know the others, you will get a nasty shock. Don't ignore any of the subjects, but ensure you have a balance where your priority subjects have the lead.
* Begin by revising all the material which you don't know as well. There is no point in beginning to revise the basics of electronics if you are pretty confident in it. You may find that also prioritizing each individual subjects modules or topics helps you. Therefore if you run out of time you will know that you have definitely revised the hardest stuff!
* Actually attempt to remember the material. It sounds stupid but most of the time people are tempted to spend all their revision time just reading or writing and assume that they know it all. Never assume; 'it makes an *** out of U and ME' and its true. If you assume you know it without actually testing yourself on it then you might get a shock in the exam...
* Read the facts a few times so you are familiar with what they mean. If there's anything you don't understand do everything you can to find out. Ask the teacher, research other books and on the Internet. You will be learning as you do it!
* After you are more familiar with them, make your own notes so that it's shorter, but ensure that they make sense so you won't need to refer back to the test book when revising.
* Don't do too much at once. Take a page and test yourself by covering it up and writing down everything you remember. Then, check it and do it again and again until you have everything! This way you are testing and revising as you re-read it over again!
* You may not enjoy revising, but if you try and take interest in what you are learning and get really stuck into it, the more you will remember!
* Never give up - easier said than done right, but giving up only makes you more of a failure when you don't get the % you wanted for your exam. You will always have the guilt of knowing you didn't try your hardest.
* Everyone learns differently; you just have to discover how the best way is for you. But in the end it all comes down to testing yourself, so you can be sure you know it!
* You may not achieve the % you expected. Know in yourself what you are capable of achieving so you don't set your targets too high. Don't settle for lower % than your ability either though, just know your ability and do your best.
* Revision isn't fun - receiving your good % is.
* Never compare yourself to your friends. They are not you. we are all different. Just do your best and be happy with that.


Cramming Techniques for Exams

* Cramming for exams should be avoided at all costs. You should only cram for an exam as a last resort. It's hard to take in and retain a large amount of information in a short period of time. Some of the tips on studying and preparing for a test may over lap with the cramming techniques below.
* Eat some food to give you energy to study, but try to avoid excess sugar which will make you hyper and will make it more difficult to study.
* An apple does a better job at keeping you focused and awake than caffeine.
* Find a well lit place with no distractions around to study but don't get too comfortable or you may fall a sleep. Keep a positive attitude, it is easier to study when you are relaxed than when you are stressed out.
* Since your time is limited you have to choose what you study, don't attempt to learn everything, focus on things that will get you the most points on the exam.
* Focus on the main ideas and learn key formulas, skip the details for now and only come back to them if you see that you have time after you have learned the key points.
* Write down the key ideas/formulas on a sheet of paper and keep on studying from that sheet, repetition is important.
* Highlight the important points in your notes, and text and focus on that.
* Read the chapter summaries (they usually do a good job at summarizing the important points), if there're no chapter summaries then skim through the text and write down key ideas.
* Study from past tests, review questions, home works & review sheets.
* Take at least one five minute break an hour so that you can gather your thoughts and let your brain relax.
* If time permits, try to get at least 3 hours of sleep (one sleep cycle) before the exam so that you don't fall asleep when taking your exam. Don't forget to set your alarm!

Tips for Scoring Good Marks/Good % in JNTU Final Exams

Tips for Scoring Good Marks/Good % in JNTU Final Exams

You can find some of the tips for scoring good marks or good % in JNTU final exams. Just go through all the links present below. Hope these will help u out to know how to get gud marks.Just click on the links

Code:

http://forum.jntuworld.com/showthrea...TU-Final-Exams http://forum.jntuworld.com/showthrea...y-Examinations http://forum.jntuworld.com/showthrea...TU-Final-Exams http://forum.jntuworld.com/showthrea...versity-exams.

For study Materials visit the below link
Code:

http://forum.jntuworld.com/showthrea...NTUWORLD-users

Guidelines about JNTU Final Project

Guidelines about JNTU Final Project

The objective of this document is to present the general guidelines for the writing up of a proper Final-project report.

All JNTU B-Tech IV-II students have to do a project in the given time period by the university.

By this time u would have got some idea about the project work as u have done with your mini project in III-II Semester.As in most of the colleges we were given choice to a study project or kit based and this could be done in an Institute,Industry or own.Most of chose to do a study project and were given permission for this and had to work on project during your IV-II Semester & we had to submit this report by the end of IV-II Class work.This project will be evaluated at the end of semester (The mini project and its report shall be evaluated with this final project work).

Basically in this Final project student can take up any Industry oriented application in his/her field of interest in their respective field/branch.First one has to submit an Abstract of the project to their concerned department head (HOD) and once he approves it ,he will assign a project guide to the individual or batch after this project work is to be started. Generally batch for a final project may have 1 to 3 members in it.

Ask following questions before you join any company for project
Code:

http://forum.jntuworld.com/showthrea...ny-for-project


Important Points:
1) Final Project will be your key to success because when ever u attend interviews in any company the first question would be "Tell me about your project ?". so do the project with a proper attention on it.

2) Better to do the projects in the fields of latest upcoming technologies so that it would fetch u a plus point during the evaluation of project & also during the interviews.

3) If your role in the project is limited to few modules,Try to have a complete idea on the project (i.e., know about all the modules & steps involved in the project) because during the project evaluation the project supervisor (i.e., evaluator) may put forward few questions regarding the other modules also.

4) Out of a total 200 marks for the project work, 40 marks shall be for Internal Evaluation (The internal Evaluation shall be on the basis of two seminars given by each student on the topic of his project) and 160 marks for the End Semester Examination.The End Semester Examination (viva-voce) shall be conducted by the same committee appointed for industry oriented mini project. In addition the project supervisor shall also be included in the committee.

5) The topics for industry oriented mini project, seminar and project work shall be different from each other.

6) The mini project and its report shall be evaluated with the project work in IV year II semester.


Guidelines to prepare project documentation.
Code:

http://www.ziddu.com/download/127164...ATION.rar.html

OR

http://www.mediafire.com/file/ugb55s...UMENTATION.rar


Sample Project Documentation.
Code:

http://www.ziddu.com/download/127166...ation.pdf.html

Ask following questions before you join any company for project

Ask following questions before you join any company for project

1.When this company started?

2.How many projects guided so far?

3.Which college students joined so far?

4.Which areas this company is guiding the projects?

5.How many months will it take to complete the project?

6.How many employees are working in this company?

7.What is the maximum group size you allow?

8.Is there any branch to this company? If so how many are there? Where are they?

9.What is the maximum cost of the project?

10.What is the minimum cost of the project?

11.What is website of the company?

12.May I know the fax no/ phone no or mail-id.

13.What is the procedure to be followed before we start the project?

14.What is the mode of the payment?

15.What kind of help company gives for preparation of final report?

16.What kind of projects you are guiding?

17.If it is hardware project, can we submit in the college?

18.Can you give some student names with phone number who has done project in this company?

19.Will company give any pre requisite training for the project?

20.If we have new ideas, can you help for implementation?

21.If it is a software simulation, what type software you are using?

22.Clarify the project type such as a) Hard design b) Hardware with software c) Software simulation d) Study project.

23.Before finalize title of the project, know brief details of project.

24.Finalizing company, area of project and title of project is equal to 30% of the project.

25.Which days we have to come to company for project?

26.Will you allow if our internal guide visits your company?

27.What is the name of the owner of the company?

28.Will you combine students from different colleges?

29.When can we start project?

30.What is the surety company gives to complete project in time?

Above are some of the questions you can ask before you finalize the project. Unless you visit atleast half dozen companies, you will not get an idea about projects.

Sunday, 6 February 2011

Guidelines About Industry Oriented Mini Project


Guidelines About Industry Oriented Mini Project

The objective of this document is to present the general guidelines for the writing up of a proper mini-project report.

All JNTU B-Tech III-II have to do a industry oriented mini project which is implemented by JNTU from R05 batch.

We were very confused as to what we had to do as this was only a mini project on whether we have to go to industry,scope of project etc.But as in most colleges we were given choice to a study project or kit based and this could be done in an Institute,Industry or own.Most of chose to do a study project and were given permission for this and we had to submit this report as soon as IV/I starts and had to work on project in III/II break.This project will be evaluated during IV/II (Along with the Final or Main Project).

Basically in this mini project student can take up any Industry oriented application in his/her field of interest in their respective field/branch.First one has to submit an Abstract of the project to their concerned department head (HOD) and once he approves it ,he will assign a project guide to the individual or batch after this project work is to be started. Generally batch for a mini project may have 1 to 3 members in it.


Impotant Points:

1. There is no page limit only thing to be considered is that concept is complete.
2. One must acquire all data and concepts related to one's project.
3. The Format Guidelines given by respective Dept.heads for report layout.
4. Project should have good idustry oriented applications.

The below info will give you the complete and detailed description of the mini projects reports.

It is essential that you produce a clear and concise report that reflects the literature survey, problem identification, project aims and objectives, the engineering design work carried out, tests performed and discussion of results. The emphasis should not be on the length of the report, but rather on the way by which the above aspects are presented In this context, you should avoid downloading bulk text and images from books or the Internet or use unconventional fonts or graphics with a view to impressing the reader You should rather show the reader that you have understood the problem at hand and used an engineering approach to produce a working solution by working as a team with your group members. You should also be able to explain the working principle and design of each stage of the developed system.Reviews will be conducted by your college in order to know the progress of your project work( 2 to 3 reviews will be taken generally).

REPORT FORMAT :

With the format given below, the mini-project report should normally not exceed 30 pages(excluding the appendix), and should not be shorter than 20 pages.

Font and Size :

• For Chapter Numbers and Titles: Times New Roman Size 18, Bold, Centered, Upper-Case.
• Sections Numbers and Titles: Times New Roman Size 14, Bold, Left aligned • Sub-section Numbers and Titles: Times New Roman Size 12, Bold, Left aligned • For the main text: Times New Roman Size 12, Justified.

NOTE :

• Do NOT put the Chapter Number and Title on a separate Page.
• If there are less than four lines remaining at the bottom of the page, start the new section or subsection on the following page.

Paragraphs and Line Spacing :

1.5 throughout. Leave a blank space from one paragraph to another.

Margins :

Top, Bottom, Right: 25mm; Right: 30mm.

Headers/ Footers :

Times New Roman Size 10.

Equations :

Should be edited with Microsoft Equation, and should be numbered in ascending order in each chapter:

E.g:


is the first Equation in Chapter 2.


Page Numbers :

Start with Page 1 at the beginning of Chapter 1. Page numbers should be centered at the bottom of the page.

Figures and tables :

• Position Figures and Tables as close as possible to the text where they are referred.
• Figures and Tables should be numbered in ascending order for each chapter, using the same sequence as for Equations.
• The number of the figure, and its caption should be typed immediately below it in Times New Roman Size 12.
• The number of the table and its caption should be typed immediately above it in Times New Roman Size 12.

TITLE PAGE : The title page should include the following information:

• Mini-Project Title
• Student Names and ID Nos.
• A statement that the report is submitted in partial fulfillment of the requirements for Practical Training of the B.Eng. (Hons) in Electrical and Electronic Engineering.
• Date of submission


TABLE OF CONTENTS : The table of contents should list all the chapters, sections and other parts of the report, along with their page numbers. In particular the following should be included:

NOTE: The above page numbers are given as examples only.

ACKNOWLEDGEMENT : Any person, institution, organization, department or lab, whose help or support you want to acknowledge for the project.

ABSTRACT : A summary of 300 to 400 words of the practical application, the problem to be solved, the approach used and the main results obtained.

LIST OF FIGURES : A list of all Figure Numbers presented in the report, and their title (E.g. Figure 2.1 Circuit diagram of the Traffic Light Controller) along with the page numbers.

LIST OF TABLES : A list of Table Numbers presented in the report and their title, along with the page numbers.


All the best to all B.Techs.

Guidelines for project documention

Guidelines for project documention

http://www.mediafire.com/?34z158ehc6bep5s

Guidelines to prepare project documentation

Guidelines to prepare project documentation

Hi friends the below link gives you a good knowledge on how to prepare documentation for the projects. I think it will be helpful.

Code:

http://www.ziddu.com/download/110098...ATION.doc.html

Saturday, 5 February 2011

Academic Regulations-Certain concession for passing (Info on 0.15% Grace Marks included)

Academic Regulations-Certain concession for passing (Info on 0.15% Grace Marks included)

JNTUH – Academic Regulations – Certain concession for passing – Regarding. Read: Note file Orders of the Vice–Chancellor


ORDER:
Presently, 0.15% grace marks are being allowed for change of class from first class to distinction (69.85 % to 70%), Second class to first class (59.85% to 60%) and pass class to second class (49.85% to 50%). With this, a total of 0.15% marks maximum are added to final year project/seminar to enable the student to get higher class for B.Tech/B.Pharm. courses.

Many representations are received from the students that a grace marks may be added for passing if a candidate failed in one/two subjects with shortage of 1, 2 or 3 marks.

Under the circumstances stated above, Vice-Chancellor is pleased to extend 0.15% grace marks facility to the candidates of any degree if he/she passes the subject(s) and obtains the degree, subject to approval of academic senate and execute council/MDC.These orders shall come into force from all examinations held during May/June 2010.

All candidates seeking benefit from the 0.15% grace marks shall apply through proper channel enclosing failed original marks memo. The principal shall verify at the college whether the candidate is passing if 0.15% grace marks facility is extended i.e. 0.15% of grand total marks of the UG/PG courses with fail in maximum two subjects.

A separate approval shall be obtained for the eligible candidates for implementation of the above relaxation as and when the applications are received.

For the official Notification check the below link

Complete Info on issue of CMM & PC to B.Tech Students & Exception of 2 subjects As per the Academic Regulations of 2005 for B.Tech. (Regular) De


Revised credit requirements for promotions rules(For Academic Year 2010-2011)-Certain Concessions

The students, their parents, Principals and Managements of the Affiliated Engineering colleges in their representation, have requested to extend the promotion rules of 2009-2010 regulations (R09 regulations) of B.Tech. to all the students of previous regulations.

The Vice-Chancellor is pleased to extend the said promotion rules of R09 regulations to all the students of previous regulations, with the following modifications—as there is no possibility of securing 37 credits for promotion from II to III year, the required credits are reduced to 36, and 62 credits for promotion from III to IV year are reduced to 60. The concessions are granted only for the academic year 2010-2011, subject to the ratification by Academic Senate and Executive Council.

Following are the details of credits required for the students who got admitted into B.Tech. during academic years from 2003-2004 to 2008-2009.

CREDITS REQUIRED FOR B.TECH. (REGULAR) STUDENTS TO GET PROMOTION FROM SECOND YEAR TO THIRD YEAR
The Principals are hereby permitted to promote the candidates to III and IV years, who secured the required credits, by considering the concessions granted in promotion rules, as given above after the declaration of results of supplementary examinations

For The official Notification check the below
OR

Reply to the post if u have any quires

JNTU-HYD Syllabus Books For All Years & All Branches (R09,R07 & R05) JNTU-HYD Syllabus Books For All Branches (R09 Regulation) 2009-2010 B.

Complete Info on issue of CMM & PC to B.Tech Students & Exception of 2 subjects

As per the Academic Regulations of 2005 for B.Tech. (Regular) Degree Course, a student will be declared eligible for the award of the B.Tech. Degree if he fulfills the following:
(i) pursued a course of study for not less than four academic years and not more than eight
academic years
(ii) registered for 224 credits and secured 216 credits with compulsory subjects as listed below
(a) all the first year subjects
(b) all practical subjects
(c) industry oriented mini-project
(d) seminar
(e) project work

In this connection, it may be noted that even if a student fails in two theory subjects or absents himself / herself for any two theory subjects, the student is eligible for the award of the B.Tech. Degree if he / she fulfills the academic regulations (i) and (ii), mentioned above.

For the students who have passed all the subjects for 224 credits, the Consolidated Marks Memo and the Provisional certificate can be collected along with IV B.Tech. – II Sem. marks memo, from the concerned Colleges directly from 22-06-2010. (Principals are requested to make necessary arrangements to collect memos, PC’s and CMM from the service section, Ground Floor, Examination Branch, JNTUH on 21-06-2010). Any student who failed in one theory subject or two theory subjects can also get his / her Consolidated Marks Memo and Provisional Certificate by submitting the enclosed Undertaking on or before 26-06-2010 to the University through the concerned Principal. The PC & CMM for such candidates will be sent directly to the Principals on 2nd July 2010.


For the official Notification & undertaking form check the below links

OR

Few Important Points to be Noted:

1) A student has to study all the subjects for 224 credits, but even if he gets 216 credits and passes all the compulsory subjects, then he is eligible to apply for PC. In the PC there will not be any indication of Fail. But on the concerned semester marks memo "Fail" will be indicated and also on Consolidated Marks Memo (CMM) "Fail" will appear for those one/two subjects.

2) I advice all the students to apply for PC if they have got 224 credits. If a candidate is in urgency to submit the PC for Visa, for higher studies then he/she may apply for PC even they acquire 216 or 220 credits, because that may not affect them.

3) For Example : Suppose a CSE student fails in Operating Systems and Computer Organization courses and applies for a PC, this may affect in getting a job An ECE student who failed in VLSI and DSP subjects may not get admission in M.Tech. in VLSI/DSP specializations.Similarly for other branch students.

Therefore if there is no urgent requirement for PC, it is better, the students pass all the subjects and take PC. The students have the option to apply for PC at any time if it is required. They have to apply through 'Tatkal' if they require it immediately.

Tatkal Process You can get the complete info about tatkal process at your Respective colleges

4) This exception of 2 subjects is also applicable for Lateral Entry students of R05 Batch.

5) students can apply for CMM,PC after 26th (after the supple results are released) even excluding the 2 subjects.

Procedures For RC,RV,PC,Original Degree,Duplicate Marks Memos,Corrections in Memos

Procedures For RC,RV,PC,Original Degree,Duplicate Marks Memos,Corrections in Memos

You can find all the Procedures From the below links

Procedure to apply for Provisional Certificate

Procedure to apply for Original Degree & Migration Certificate
Procedure for Recounting
Procedure for Revaluation
Procedure to correct Names in Marks lists
Procedure to get Duplicate Marks Memo (In case if they are lost or anyother reason)
Procedure to apply Transcripts (Certified Duplicate Marks Memos)

Important Info Regarding the discrepancy in memorandum of marks

Important Info Regarding the discrepancy in memorandum of marks

Many students are approaching the University Examination Branch about the discrepancy in memorandum of marks (i.e name corrections/absent/any other errors) even after years of declaration of results. In this regard, it is to bring to your notice that any discrepancy in result should be brought to the notice of the Examination Branch within 2 weeks after the declaration of result through a representation with supporting documents.

These representations will be verified thoroughly and appropriate action will be taken and it will be intimated to the respecting colleges within 3 weeks after the last date for application of revaluation/ discrepancy. If any information is not received within the stipulated time, the principals may send their representative to the examination branch for clarification or for any further information. Principals are requested to inform their students accordingly, so that any discrepancy should be sent through proper channel with necessary supporting documents within 2 weeks of the declaration of results. No claims shall be entertained after the due date.


For the official notification check the below link

http://www.ziddu.com/download/809703...tInfo.doc.html

Procedure to apply Transcripts (Certified Duplicate Marks Memos)

Procedure to apply Transcripts (Certified Duplicate Marks Memos)

1. Student has to pay the necessary fee, in form of DD infavour of The Registrar, JNTU, Hyderabad payable at Hyderabad and handover the same to examination cell along with application (fee Rs. 40 per copy)

2. After registration at college, the application will be returned to the student.

3. The student has to send the application to JNTU on his own. The student shall keep a copy of the application for future reference.

Procedure For Revaluation

Procedure For Revaluation

1. Fee for Revaluation Rs. 1000/- per subject.

2. Fee is to be paid at examination cell of your Respective college in cash along with application. (application cost Rs.5/-)

3. Student has to produce Xerox copy of result for which he is applying. If it is based on result in net, the same is to be downloaded and handed over to the examination cell while applying.

4. No Revaluation for Lab Marks

Procedure to correct Names in Marks lists

Procedure to correct Names in Marks lists

1. Fee of Rs. 50/- per Mark List is to be paid by DD drawn in favour of Registrar, JNTU, Hyderabad Payable at Hyderabad.

2. Student has to apply through Examination cell along with Xerox copy of SSC Marks memo, and Original copies of marks lists on which correction is to be made.

3. Postal charges Rs.25/- is to be paid by student (Depends on the respective colleges).

Procedure for Recounting

Procedure for Recounting

1. Fee for Recounting Rs. 100.00 per subject.

2. Fee is to be paid at examination cell of your Respective college in cash along with application. (application cost Rs.5/-)

3. Student has to produce Xerox copy of result for which he is applying. If it is based on result in net, the same is to be downloaded and handed over to the examination cell while applying.

4. No recounting for Lab Marks

JNTUH-Allotment of branch code for second shift M.Tech programmes


For the official notification check the below link